- Air activated electric switch - 4 PSI cracking pressure - 10-32 port - 1/16 exchangeable fitting - UL listed switch

- Air activated electric switch - 4 PSI cracking pressure - 10-32 port - 1/16 exchangeable fitting - UL listed switch

- Large moisture separator - 1/8 FPT ports - 5 Micron filter

- Fits S-1200 SE Only - Use as extras while autoclaving

- Fits most common style syringes - Universal type tip - Fully autoclavable - Package of 5

- Fits most common style syringes - Universal type tip - Fully autoclavable - Package of 50

- 1/16 - 1/8 Stepped 10-32 barb

- 125 PSI working pressure - Smooth lever operation - Gun w/10' coiled yellow tubing

- 125 PSI working pressure - Smooth lever operation - Gun only with 1/4 FPT port

- 125 PSI working pressure - 10' coiled yellow tubing only

- Solid brass - 2.5 PSI cracking pressure - Air or water use

- Solid brass - 2.5 PSI cracking pressure - Air or water use

- Solid brass - 2.5 PSI cracking pressure - Air or water use

- Euro-style with spool valve buttons - Smooth lines enable thorough wipedown - Trim lightweight head - Accepts standard autoclavable syringe tips - Cross-pin allows easy button exchange - Quick-tip release with 7' straight grey tubing

- Syringe with 7' straight grey tubing - Smooth lines enable thorough wipedown - Trim lightweight head - Accepts standard autoclavable syringe tips - Cross-pin allows easy button exchange - Quick-tip release

- Accepts all arms with 1/2 mounting pin - Perfect for folding telescopic arms - Mounts onto any horizontal surfaces

- Includes 1/4 x 10-32 poly connector - OEM #60407 - Direct replacement for Cavitron 3000 and 2002 Prophy-Jet 30 Cavi-Jet 30 Cavi-Endo 25 Cavi-Med

- Separate water and air banks - Internal water and air flow controls - 10-32 ports - Nickel plated brass

- Drive-air Picnh style valve - Direct replacement for Ampco units - Accepts 1 1/4 and 3 1/8 tubes

- 10-32 ports 1/8 or 1/4 fittings - Manages air and/or water flow - Nickel plated brass - Perfect for syringes

- Fits S-1100 HVE only - Use as extras while autoclaving

- Auto HP hanger valve NC (fits H-1000G etc)

- Auto air accessory valve NO (fits H-1030 etc)

- 3 way on/off grey toggle - Holder mounts to any 1/2 bar

- Fits 1/4 shafts - Secures with set screw - Black

- Fits 1/4 shafts - Secures with set screw - Grey

- Mini control block for 3 handpieces - Solid brass construction - Extra mounting holes allows variety of placements - 10-32 threaded barbs - Longest lasting inter-woven diaphragm - High flow design - Direct replacement for similar blocks

- Constant 35 PSI output - Rated input from 0 to 150 PSI - Non-relieving - In-line mounting - 1/16 barbed fittings

- 35 micron filter disc - Use for V-1526 and other mini filters - Measures 7/8 x 1/16

- Variable restriction of air or fluids - Pass-thru accepts 1/8 or 1/4 hookup tubing

- All brass body and Valve - Tough flexible toggle - Black - 2 way NC

- All brass body and Valve - Tough flexible toggle - Grey - 2 way NC

- All brass body and Valve - Tough flexible toggle - Grey - 3 way NC

- All brass body and Valve - Tough flexible toggle - Black - 3 way NC

- All brass body and Valve - Tough flexible toggle - Grey - 3 way NO

- For mounting most valves or mini-regs requiring 7/16 hole

- Solid plated braass - Delivers finely metered air or fluid - 10-32 female ports - Knobs included - Grey

- Solid plated braass - Delivers finely metered air or fluid - 10-32 female ports - Knobs included - Black

- Solid plated braass - Delivers finely metered air or fluid - 10-32 female ports

- Solid plated braass - Delivers finely metered air or fluid - 10-32 female ports

- Relay valve with actuator - All brass construction - Normally closed - 10-32 ports

- Brass valve - 10-32 inlet and outlet ports - Exposed actuating pin

- All brass body and valve - Tough flexible toggle - Grey - 2 way

- All brass body and valve - Tough flexible toggle - Grey - 3 way

- All brass body and valve - Tough flexible toggle - Black - 2 way

- All brass body and valve - Tough flexible toggle - Black - 3 way

- Solid plated brass - Variable restriction of air or fluids - Pass-thru accepts 1/8 or 1/4 hookup tubing - Valve only no knob

- Solid plated brass - Variable restriction of air or fluids - Pass-thru accepts 1/8 or 1/4 hookup tubing - Grey

- Solid plated brass - Variable restriction of air or fluids - Pass-thru accepts 1/8 or 1/4 hookup tubing - Black

- Pinch style valve reliability - Accepts 1 1/4 and 4 1/8 tubes

- Pinch style valve reliability - Accepts 1 1/4 and 4 1/8 tubes

- No piston or O-rings - All brass body - Tough flexible toggle - Available in 2-way - Black

- No piston or O-rings - All brass body - Tough flexible toggle - Available in 2-way - Grey

- No metal to water contact - Dependable simple to maintain - Replaces OEM unit water valves - 1/16 barbed signal fitting

- Build your own from scratch - Raw pressure head - includes 1/8 FPT port

- Use to build your custom fluid delivery system - Basic pressure head assembly - includes 1/8 FPT port for gauge

- Forest style threaded button - Fits Parts Warehouse C-1600 Series and older Forest

- Repair kit for C-1700/C-1710

- O-ring (10-pack)

- Disposable plastic - packages of 10

- Allows connection of an SE to an HVE - Inserts into an HVE tip - 7/16 OD with a 7/32 barb

- 25KHz 3-wire Bobcat handpiece assembly - Ready to plug into Bobcat circuit board

- 25KHz 3-wire handpiece assembly - Fits 2002 Cavitron 25KHz Cavijet & 25KHz Sonatron

- 25KHz 3-wire handpiece assembly - Replacement assembly for all 25KHz Cavitrons including the Bobcat and 25KHz Sonatron

- 30KHz 3-wire handpiece assembly (with connector) - For models without prophy function

- 30KHz 3-wire handpiece assembly - Fits all 30KHz Cavitron - (Except models with prophy function within the handpiece)

- Connects to 4 hole Midwest HP tubing - Stepped barb & gasket included - Provides steady stream of air - Great for cleaning or testing

- Nickel plated brass - Air or water use - High pressure inlet blocks lower pressure inlet - 1/16 Barbed fittings

- Nickel plated brass - Air or water use - High pressure inlet blocks lower pressure inlet - 1/8 Barbed fittings

- Fits S-1105 HVE only - Use as extras while autoclaving

- Traditional rotary on/off - 360° swivel quick disconnect - Lightweight comfortable body - Fits large-bore HVE hangers - Easy to disassemble for cleaning - Black

- Traditional rotary on/off - 360° swivel quick disconnect - Lightweight comfortable body - Fits large-bore HVE hangers - Easy to disassemble for cleaning - Grey

- Direct replacement for 2 or 3-wire applications - 7' straight - Includes (1) water tube

- Direct replacement for 2 or 3-wire applications - 7' straight - Includes (1) water tube

- Flexible puller non kinking - Pulls 1/8 and 1/4 tubing through umbilical shell - Non-corroding brass

- Traditional rotary on/off - 360° swivel quick disconnect - Lightweight comfortable body - Hangs by tip in syringe hangers - Easy to disassemble for cleaning - Black

- Traditional rotary on/off - 360° swivel quick disconnect - Lightweight comfortable body - Hangs by tip in syringe hangers - Easy to disassemble for cleaning - Grey

- Use as a replacement for most dental units - 9 x 14 x 4-1/2 includes plugs and groments - Durable powdercoat finish - Grey plastic snap-on cover - 2 x filters - 2 x manual shut-offs - 1 x mini water regulator

- 9 x 14 x 4-1/2 - 2 & 3/4 pass thrus - Durable powdercoat finish

- Use as a replacement for most dental units - 9 x 14 x 4-1/2 includes plugs and groments - Durable powdercoat finish - Grey plastic snap-on cover

- Air activated color pressure indicator - Attractive grey panel mount - 10-32 port - Green

- Air activated color pressure indicator - Attractive grey panel mount - 10-32 port - Red

- Accepts all arms with 1/2 mounting pin - Perfect for folding telescopic arms - Mounts on wall or cabinet

- Air activated water retraction - 10-32 ports

- Mini water valve - Positive shut-off 2-way - Non-retracting - Plated brass

- 10-32 ports - 1/16 barbed fittings - Nickel plated brass - Non-retracting